It's 2:33 PM, and We're Open!

Is Hydro Jetting Safe for Older Pipes?

A cracked blue pipe.

Hydro jetting is a popular drain cleaning method among homeowners for its effectiveness and eco-friendly technology. Although this plumbing service can be used to remove blockages of a wide variety, it isn’t always the right solution for every situation.

If you’re currently dealing with clogged drains or blocked sewer pipes, you might have a few questions about hydro jetting services. For instance, you might be asking yourself, “Is hydro jetting safe for older pipes?” When it comes down to it, this question can have a number of different answers depending on the situation.

Below, we’ll go over everything you need to know about hydro jetting old pipes and a few alternatives you may want to consider.

Is Hydro Jetting Old Pipes a Safe Decision?

One of the factors that makes hydro jetting stand out among the crowd is its use of highly-pressurized water. The equipment used for these services is known for pressurizing water up to 35,000 PSI (or pounds per square inch). This is a considerable amount of power, as it’s meant to break through a wide range of stubborn clogs such as tree roots.

Nonetheless, it’s easy to worry about how your pipes will hold up with such high-pressurized water being directed into them — especially if they’re up there in age. So, is hydro jetting safe for older pipes? When it comes down to it, the answer to this question can be “yes” or “no.”

There are some instances where hydro jetting is safe for old pipes. However, it’s important to think about the type of pipes you have and whether or not they have cracks. For example, cast iron sewer lines are susceptible to corrosion as they age. This rust can cause the pipes to crack. Because of this, you’ll most likely want to avoid hydro jetting cast iron pipes if they’re old.

If you’re unsure whether or not you should be hydro jetting old pipes, don’t hesitate to call a plumbing expert for help. A professional can give you advice and recommend the best course of action to help you avoid potential hydro jetting damage.

What Are Alternatives to Hydro Jetting?

All-in-all, hydro jetting is safe for older pipes — but only in certain situations. Depending on the state of your pipes and their material, a professional plumber may recommend an alternative drain cleaning method. For instance, another option is for the plumber to use a drain snake to physically remove the blockage.

The use of highly-pressurized water is the factor that makes hydro jetting old pipes so risky. Fortunately, drain snaking does require any high-pressure water. Instead, a drain snake is a tool that is used to wrap around a clog and pull it from the affected pipe or drain.

Of course, if your sewer line is severely damaged, replacing it might end up being the best solution. Broken sewer lines can cause a wide range of problems if not addressed in a timely manner, so don’t wait longer than necessary to call a plumber. It’s always a good idea to schedule your services sooner rather than later.

Need Hydro Jetting Services in Dallas, TX? We Can Help!

Is hydro jetting safe for older pipes? As you can see, this question doesn’t have a cut-and-dry answer. If you’re unsure whether or not hydro jetting drain cleaning services are right for your needs, contact Pure Plumbing for help!

We can provide you with a quality drain cleaning in Dallas, TX, or the surrounding area. Whether you’re dealing with clogged drain lines or damaged sewer pipes, we have solutions to get your plumbing system back up and running in no time. We always go above and beyond to ensure the job is done the right way. Contact us today to schedule an appointment with our team of friendly plumbing experts!